IQ pH/ORP armatures - WTW

IQ pH/ORP armatures - WTW

  • SKU: 109170
Request a Quote
  • Description
    Digital pH/ORP armature to be used with electrodes, connectable to the IQ SENSOR NET
    SensoLyt®700 IQ – digital pH/ORP armature with integrated preamplifier and temperature sensor as well as lightning protection to be connected to IQ SENSOR NET:
    •Stable signals by digital signal processing
    •Convenient by calibration in the lab and glass breakage detection
    •Reliable measured values by integrated temperature sensor
    By storing calibration values within the sensor, a "pre-calibrated pH-measurement" can be generated. Due to our quick-lock, the sensor can be disconnected and - after laboratory calibration - re-connected at the site easily. Inconvenient calibrations in the field under adverse conditions can be completely eliminated if there is an IQ connection in the lab.

    A special switch also allows automatic monitoring for glass breakage. The required replacement of the SensoLyt® electrode is quick and uncomplicated.

    The sea water model is optimized for the use in special media: All wetted parts are made of titanium and plastic and are therefore extremely resistant to corrosion.
  • Specifications

    * SW: Sensor as sea water model (with plastic arming (POM))

    Model

    SensoLyt® 700 IQ

    SensoLyt® 700 IQ SW*

    Order No.

    109170

    109171

    Measuring method

    Electrochemical

    Measuring range

    0.00 ... 14.00 pH (depending on the electrode)
    ± 2000mV (depending on the electrode)

    Resolution

    0.01 pH
    1mV

    Integrated Preamplifier

    Yes

    Sensor check funktion

    Yes

    Temp. measurement

    Integrated NTC, 23 ... 140 °F (-5 ... +60 °C)

    Temp. compensation

    32 ... 140 °F (0 ... +60 °C)

    Pressure Resistance

    10 bar

    Ambient Conditions

    Operating temperature: 32 ... 140 °F (0 ... +60 °C)

    Electrical connections

    2-wire shield cable with quick fastener to sensor

    Electromagnetic Compatibility

    EN 61326, Class B, FCC Class A;
    Intended for indispensable operation

    Certifications

    CE, cETL, ETL

    Mechanical

    Sensor body: V4A stainless steel 1.4571
    Protection cap: PVC
    Sensor holder: POM
    Protection rating: IP 68

    Weight (without cable)

    Approx 2.14 lb (970 g)

    Approx. 3.97 lb (1.800 g)

    Warranty

    2 years for defects in quality

Downloads

Close