SOFTWARE AND UPDATES FOR THE IQ Sensor Net
Download the latest version of software for the multi-parameter measuring system IQ Sensor Net:
Softwareupdate IQ Sensor Net "Update Pack (L1)", V2.23
Version history – innovations:
- V2.23
- Minor general improvements for ISE sensors (update is needed for the controller/terminal software,
new version: 3.97)
- V2.22
- Freeze measured value output at fieldbus level (during maintenance and calibration)
- Minor general improvements
- V2.21
- Alyza IQ - Drain single ChemBag tube
- Alyza IQ - Optimized cooling unit
- IQ SENSOR NET - MIQ/CR3 and MIQ/C6 for System 281
- Spectral sensors - Update relevant for production
- Minor general improvements
- V2.20
- IQ SENSOR NET - Troubleshooting of Profinet communication in the controller software 3.94
- V2.19
- Alyza IQ – Manual emptying can be stored in the system
- Alyza IQ – Fast access to last 50 actions
- V2.18
- Minor general improvements
- Spectral sensor – Text changes or additions for Swedish, English, Portuguese, Czech, Hungarian, Japanese and Korean
- V2.17
- Minor general improvements for cooling unit Alyza
- DIQ/S 281 – Extension by ViSolid® 700 IQ (total suspended solids)
- DIQ/S 281 – Extension by IFL 700 IQ (sludge level)
- V2.16
- Continuous tightness control of MPV
- Dosing control after filling
- Additional text during download of service files
- Minor general improvements
Download ZIP file
Files for PLC
EtherNet/IPTM EDS file, Version 1.2
File is needed on PLC to detect the IQ Sensor Net module MIQ/MC3 and of System 282/284
Download EDS file
PROFIBUS GSD file (for current IQSN Software), Version 1.24
File is needed on PLC to detect the IQ Sensor Net with software version ≥3.50:
- DIQ/S 282-PR(/24V)
- DIQ/S 284-PR(/24V)
- MIQ/MC2-PR
- MIQ/MC3-PR
- MIQ/2-PR
- MIQ/3-PR
- DIQ/S 182-PR(/24V)
- DIQ/S 182 XT-4-PR(/24V)
Download GSD file
PROFIBUS GSD file (for older IQSN software and controller), Version 1.22
File is needed on PLC to detect IQ Sensor Net with software version <3.50:
- MIQ/MC2-PR
- MIQ/2-PR
- DIQ/S 182-PR
- DIQ/S 182 XT-4-PR
as well as for the older controller modules:
- MIQ/MC-(A)-PR
- MIQ/(-A)-PR
Download GSD file
PROFINET GSDML file, version 2.1
File is needed on PLC to detect the IQ Sensor Net System 282/284 and the MIQ/MC3.
Required until PNIO version 2.0
Download GSDML file, version 2.1
PROFINET GSDML file, version 2.41
File is needed on PLC to detect the IQ Sensor Net System 282/284 and the MIQ/MC3.
Required until PNIO version 2.2
Download GSDML file, version 2.41
PC software for remote control
IQ Software Pack Connect, Version 1.00
For network connection. Only for the MIQ/MC2 controller.
Includes the following programs for remote access to the IQ Sensor Net:
- IQS PC Terminal Connect for remote access to the IQ Sensor Net
- IQS Datalog Transfer Connect for data transfer from IQ Sensor Net to the PC
- IQS ConvigSafeLoad Connect to backup and reverse backup the configuration data of the IQ Sensor Net
Download ZIP file
REMOTE ACCESS TO THE IQ Sensor Net
When using MIQ/MC2, MIQ/MC3 or the System 282/284 (with Ethernet interface), remote access is available via our integrated web server IQ Web Connect. The remote access provides:
- total control of the IQ Sensor Net
- any time and worldwide
- troubleshooting and remote assistance – without on-site visit
- access protected by password
- no licence, no extra cost
To connect the IQ Sensor Net to a local network or the internet, please reffer to the respective manuals, chapter 6: