• Multiparameter-Labormessgerät inoLab® Multi 9310 IDS
  • Multiparameter-Labormessgerät inoLab® Multi 9310 IDS
  • Multiparameter-Labormessgerät inoLab® Multi 9310 IDS

Multiparameter benchtop meter inoLab® Multi 9310 IDS

  • SKU: 1FD350
Request a Quote
  • Description

    inoLab® benchtop devices offer the correct solution for pH, ORP, dissolved oxygen and conductivity measurements in the lab

    •Uncompromised measuring accuracy
    •Wireless ready
    •Digital sensor recognition
    •Smart sensor evaluation
    The new inoLab® Multi 9310 IDS is highly suitable for digital measurements of pH, ORP, dissolved oxygen (optical), BOD, conductivity and turbidity in the lab. Use the new wireless modules together with the new IDS plug head sensors, be independent from cables and measure i.e. conveniently under laboratory hoods or laminar flow benches. The IDS technology allows optimized measurements and efficient documentation in the simplest manner. A USB interface or an optionally installed printer allow the documentation via the computer or directly on the meter.

    Measuring accuracy
    •The digital signal transfer eliminates interference, securely assigns calibration data, simply transfers sensor data
    •The smart sensor evaluation (QSC) informs about the actual status of the electrode and thus increases the operational safety
    •The CMC function visualizes the optimized measuring range and support correct measurements
  • Specifications

Downloads

  • Manual

    inoLab® Multi 9310 IDS(-P) (German)

    Laborgerät,
    Bedienungsanleitung

    inoLab® Multi 9310 IDS(-P) (English)

    Laboratory meter
    Operating manual

    inoLab® Multi 9310 IDS(-P) (Spanish)

    Laboratory meter,
    Operating manual

    OxiTop®-IDS Multi 3630/3620 IDS (German)

    Wireless operation of OxiTop-IDS measuring heads, 
    Operating Manual

    inoLab® Multi 9310 IDS(-P) (French)

    Digital system for IDS-sensors, 
    Operating Manual

    OxiTop®-IDS Multi 3630/3620 IDS (English)

    OxiTop-IDS Multi 3630/3620 IDS,
    Operating Manual

    MultiLab User 2.00 (English)

    Operating Manual / User administration

    MultiLab User 2.00 (French)

    Mode d'emploi / Gestion des utilisateurs

    MultiLab User 2.00 (Spanish)

    Instrucciones de operacion / Gestión de usuarios

  • Software

    inoLab® Multi 9310 - Windows Software Firmware Update - V2.16

    Recommendation: Because of continuous improvement of internal performance we always recommend using the latest firmware version. Download and installation notes: The cable for the serial USB interface is part of the delivery.

    Version history – innovations 
    V2.16: General optimizations and minor bug fixes
    V2.15: General optimizations and minor bug fixes
    V2.14: Minor updates and optimizations with the usage of the VisoTurb® 900-P
    V2.13: Update recommended; solves a problem with oxygen measurement of the last version.
    V2.12: Solves a problem when switching the meters on or off: If the meter does not turn on, first perform a reset: Please press simultaneously “Menu – Enter” and “On/Off”, this will boot the meter automatically (without losing data).
    V2.11: General optimizations and minor bug fixes

    MultiLab Importer-Setup32

    Software

    Version history – innovations

    V 1.25: MultiLab Importer (Excel Add-In for acquisition of measured data)

    • Allows measurement and data entry of barcoded sample-ID via PC-connected barcode Reader for Turb® 750, Turb 430® and photoFlex® Series

    V 1.24: MultiLab Importer (Excel Add-In for acquisition of measured data)

    • New: Includes now photometers and turbidity meter of pHotoFlex series, Turb 430 and Turb 750 models
    • General improvements

    V1.23: Enhancements for MultiLab Importer

    • New Download of OxiTop®-IDS measurement date possible (results and measurement parameters)
    • Enhancement at transfer of electrochemical measurement results.

    MultiLab Importer-Setup64

    Software

    Version history – innovations

    V 1.25: MultiLab Importer (Excel Add-In for acquisition of measured data)

    • Allows measurement and data entry of barcoded sample-ID via PC-connected barcode Reader for Turb® 750, Turb 430® and photoFlex® Series

    V 1.24: MultiLab Importer (Excel Add-In for acquisition of measured data))

    • New: Includes now photometers and turbidity meter of pHotoFlex series, Turb 430 and Turb 750 models
    • General improvements

    V1.23: Enhancements for MultiLab Importer

    • New Download of OxiTop®-IDS measurement date possible (results and measurement parameters)
    • Enhancement at transfer of electrochemical measurement results.

    MultiLine® Multi 3620 IDS/3630 IDS, inoLab® Multi 9620 IDS/9630 IDS - Firmware Update IDS WLM-M V3.01

    Download and installation notes:

    Before installation please read the instruction manual.
    System Requirements:
    Microsoft Windows 2000, Windows Server 2003, Windows XP, Windows Vista or Windows 7

    Version history – innovations:

    V3.01: Allows the conventional operation of OxiTop®-IDS heads which had been working at an IDS Gate.
    V3.00: Update for connecting OxiTop®-IDS measuring heads

    MultiLab User - Software Update V2.00

    MultiLab User (PC-Software) for generation of User Administration for following devices: Turb ® 750 Serie and Multi 3630 IDS, Multi 9630 IDS, Multi 3620 IDS, Multi 9620 IDS, Multi 3510 IDS and Multi 9310 IDS.

    No administration rights required.
    Requirements: Win 10, free USB connecion or USB-Hub (USB driver)
    Version: V2_00
    Installation: Unzip "Install_MulitLabUser_V2-00.zip" and install by following on-screen instructions

Related Products

Close